Categoria
Filtra
8 annunci per "Motore" in Attrezzi e macchine - Liechtenstein
Dal più nuovo
Triesen, 9495, 03.10.2026
Schneefräse zu verkaufen
Verkaufe gut erhaltene Schneefräse . 200ccm Motor. Der nächste Winter kommt bestimmt.
650.-
Schellenberg, 9488, 02.10.2026
Schneefräse 65cm - neuer Motor
Revidierte Schneefräse, mit neuem Motor, Räumbreite 65cm, läuft Einwandfrei.
400.-
Eschen, 9492, 27.09.2026
Grosse Motorsäge Kettensäge Motorkettensäge Motor 58ccm
Verkaufe hier eine Motorkettensäge, Motor 58ccm, mit Zubehör wie abgebildet, montiert ist aktuell 18 Zoll Schwert. Sehr wenig genutzt. Verkaufe es weil ich Probleme mit der linken Hand habe und es nicht mehr nutzen kann.
Das Zubehör umfasst 4 Liter neues Ketten öl, Schwert 16 Zoll mit Kette, Mischbehälter und Zusätzlicher Starter, dieses Zubehör ist neu und unbenutzt.
Nur gegen Abholung in Liechtenstein Eschen.
180.-
Balzers, 9496, 30.08.2026
Beatbot Sora 30 Pool-Schwimmbadroboter
NEU - UNGEBRAUCHT!
Marke: Beatbot
Modellname: Beatbot Sora 30
Farbe: Marineblau
Stromquelle: Batteriebetrieben
Besonderes Merkmal: 10.000 mAh Klassenführend, 4-Motor-System und Doppelgruppen-Walzenbürste, Intelligentes Parken auf der Oberfläche, Maximale Saugkraft: 6800 GPH10.000 mAh Klassenführend, 4-Motor-System und Doppelgruppen-Walzenbürste, Intelligentes Parken auf der Oberfläche, Maximale Saugkraft: 6800 GPH
Weitere Info's: https://beatbot.com/pages/sora-30?srsltid=AfmBOoo87zuNiyQslNF3_17H-RkiYF161h-tKSplpix4cTp47b0fOI96
Garantie: Kaufdatum 17.08.26 -> Originalkaufbeleg liegt bei!
Verpackung: Originalverpackt und ungeöffnet!
Abholung: 9496 - Preis nicht verhandelbar.
Versand CH: Porto CHF 30.00
425.-
Eschen, 9492, 23.08.2026
Teledyne LeCroy MDA803A Motor Drive Analyzers Oszilloskop
Teledyne LeCroy MDA803A Motor Drive Analyzers
350 MHz, 8 Ch, 12-bit, 10 GS/s, 50 Mpts/Ch Motor Drive Analyzer
Spezifikations
Motor Drive Analyzers provide complete three-phase power analysis from motor drive input through motor mechanical output, with results in a convenient Numeric table format. Motor speed, position, and torque integration are the most complete available. Long memory, per-cycle synthesized Waveforms and Zoom+Gate mode provide powerful dynamic drive and motor analysis. 8 analog input channels (MSO optional) with high resolution (12-bits), sample rate (up to 2.5 GS/s), bandwidth (up to 1 GHz) and memory (up to 250 Mpt/ch) provide unique capability to perform complete system debug on the motor drive power section, motor mechanical performance, and embedded drive control system operation.
Key Features:
Complete Motor Drive System Debug and Validation in One Instrument
Three-Phase Power Measurements; Real, Apparent, Reactive Power
Efficiency Measurements
User-Configurable Power Table
Two- and Three-Wattmeter Methods Supported
Per-Cycle Time-Correlated Waveforms From Power Values
Dynamic Drive Response Analysis, From Startup To Overload
Unique Zoom+Gate Mode
Line-Line To Line-Neutral Voltage Conversion
1000 VRMS Isolation with HVD Series Differential Probes
Easily Interface Other Current Measurement Devices
Complete Motor Integration (Torque, Speed, Position)
Flexible Setup Capability Graphical User Interface
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
16 700.-
Eschen, 9492, 23.08.2026
Teledyne LeCroy MDA805 Motor Drive Analyzers (Oszilloskop)
Technische Merkmale:
Teledyne LeCroy MDA805 Motor Drive Analyzers
500 MHz, 8 Ch, 12-bit, 2.5 GS/s, 50 Mpts/Ch Motor Drive AnalyzerHighlights:
Spezifikations
Motor Drive Analyzers provide complete three-phase power analysis from motor drive input through motor mechanical output, with results in a convenient Numeric table format. Motor speed, position, and torque integration are the most complete available. Long memory, per-cycle synthesized Waveforms and Zoom+Gate mode provide powerful dynamic drive and motor analysis. 8 analog input channels (MSO optional) with high resolution (12-bits), sample rate (up to 2.5 GS/s), bandwidth (up to 1 GHz) and memory (up to 250 Mpt/ch) provide unique capability to perform complete system debug on the motor drive power section, motor mechanical performance, and embedded drive control system operation.
Key Features:
Complete Motor Drive System Debug and Validation in One Instrument
Three-Phase Power Measurements; Real, Apparent, Reactive Power
Efficiency Measurements
User-Configurable Power Table
Two- and Three-Wattmeter Methods Supported
Per-Cycle Time-Correlated Waveforms From Power Values
Dynamic Drive Response Analysis, From Startup To Overload
Unique Zoom+Gate Mode
Line-Line To Line-Neutral Voltage Conversion
1000 VRMS Isolation with HVD Series Differential Probes
Easily Interface Other Current Measurement Devices
Complete Motor Integration (Torque, Speed, Position)
Flexible Setup Capability Graphical User Interface
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
18 400.-
Eschen, 9492, 23.08.2026
Tektronix INC P6021A AC und INC P6022 AC Current Probe
Tektronix INC P6021A AC Current Probe AND Tektronix INC P6022 AC Current Probe
Herstellerbeschreibung:
The P6021 and P6022 Current Probes provide versatile AC current measurements. Both probes provide accurate current measurements over a wide range of frequencies. The P6021 and P6022 allow current measurements without breaking the circuit by clipping onto the current carrying conductor. Shielded probe heads are not grounded when the slides are in their open positions, eliminating accidental grounding of the circuit under test.
Key performance specifications
P6021A
o 120 Hz to 60 MHz
o 10.6 A RMS, 250 A peak, 10 mA sensitivity
P6022
o 935 Hz to 120 MHz
o 2.12 A RMS, 100 A peak, 1 mA sensitivity
Key features
For 1 M inputs
Shielded probe head
AC only
Split core construction allows easy circuit connection
1.5 m (5 ft) cable
Applications
Motor drives
Power inverters/converters
Power supplies
Avionics
P6021A
For general purpose applications, the P6021A provides wide-band performance with excellent low-frequency characteristics. Bandwidth is 120 Hz to 60 MHz. The probe range is switchable between 2 mA/mV and 10 mA/mV.
P6022
With a head size of 0.47 in. x 0.25 in. (10 mm x 6 mm, about half the size of the P6021A) and a bandwidth of 935 Hz to 120 MHz, the P6022 is ideal for measuring currents in compact, high-performance circuits. Passive termination output is switchable between 1 mA/mV and 10 mA/mV.
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
3 840.-
Eschen, 9492, 23.08.2026
Teledyne Lecory CA10-Quadpak PRoBus- Current Adapter
Technische Merkmale:
Teledyne Lecory CA10-Quadpak Programmable-PRoBus- Current Adapter
Set of 4 CA10 Programmable Current Sensor to ProBus Adapters for third-party current sensors
Key Features
Provides ability for third party current sensor to operate like a Teledyne LeCroy probe
Programmable EEPROM for saving third party current sensor parameters
Allows for addition of shunt resistor and RLC filter components
ProBus Active interface with automatic scaling in A/div
Easy to use, saves time and possible errors
The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. It allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.
Measurement Flexibility
Examples of devices that can be used with the CA10 include Pearson Current Transformers, Danisense/LEM Current Transducers, PEM-UK Rogowksi Coils, or any conventional turns-ratio current transformers. Once the CA10 is programmed, the third party transducer/transformer will be recognized and operate like a Teledyne LeCroy probe.
Power of Customization
The CA10 provides the ability to easily install physical hardware components such as shunt resistors and bandwidth filter components based on the requirements of the device being used.
The CA10 also has programmable bandwidth limit filters of full BW, 200 MHz, or 20 MHz.
Easy to Use
The programmable interface is intuitive and easy to use. Once the CA10 is configured, it will recognize the third party device with the correct scaling factors on any compatible Teledyne LeCroy oscilloscope or motor drive analyzer. This saves time and possible errors involved in manually entering scaling factors each time the device is connected.
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
2 400.-
Note legali
Italiano
© SMG Swiss Marketplace Group AG 2026.
La duplicazione e la ripresa degli annunci da parte di terzi, in particolare di foto e dati personali in essi contenuti, viola i diritti ad essi associati ed è espressamente vietate.