PEAVEY BASS MARK III - MODEL 400B (1978)
Legendary Peavey 400 bass head (220V version). This is the MK3 model, manufactured in 1978.
Unlike many similar heads on the market, this unit has been serviced and features newly installed, top-tier electrolytic capacitors (such as TAD, F+T, etc.).
It is ready to play immediately, with no further work required.
Highly sought-after for genres such as Stoner, Doom, Sludge, etc.
* Manufacturer: Peavey Electronics (Meridian, Mississippi - USA)
* Year of production: 1978
* Technology: Solid State
* Power Amp Module: Peavey 400B
POWER SPECIFICATIONS
* Power at 2 Ohms: 300 Watts RMS (at 1% T.H.D.)
* Power at 4 Ohms: 210 Watts RMS (at 1% T.H.D.)
* Minimum load impedance: 2 Ohms
PROTECTION AND DYNAMIC CONTROL SYSTEMS
* DDT Compression: Proprietary compression circuit (Distortion Detection Technique) with front-panel LED indicator. Prevents power amp clipping and protects speaker cones.
* Thermal protection: Automatic overheat sensor.
PREAMP SECTION AND CHANNEL CONFIGURATION
* Architecture: 2 blendable independent channels (Channel A and Channel B) managed by an Automix logic circuit.
* Channel A (Active Equalization):
* Gain controls: Pre Gain (with Pull-Bright switch), Post Gain.
* Equalization: Low (active), High (active), plus Parametric Mid section with rotary controls for Shift (frequency) and Function (cut/boost).
* Channel B (Passive Equalization):
* Gain controls: Pre Gain (with Pull-Bright switch), Post Gain.
* Equalization: Bass, Middle, Treble (classic passive circuit).
* Master Equalizer:
* 6-band active graphic equalizer. * Dedicated selector switches to independently engage or bypass the graphic EQ on Channel A and/or Channel B.
FRONT PANEL CONNECTIONS (Automix System)
* Input 1 (High Gain): Standard high-sensitivity input for passive basses (+6 dB).
* Input 2 (Low Gain): Attenuated input for active basses or instruments with high-output electronics.
* Automix Input: Activates both channels simultaneously, allowing the two different equalization types (A + B) to be combined and blended.
REAR PANEL CONNECTIONS
* Speaker Outputs: Two parallel-wired 1/4" jack outputs for speaker cabinets.
* Patching & Line Signals:
* Preamp Out (1V RMS)
* Power Amp In (Direct input to the power amplifier stage)
* Line Out (Balanced, frequency-compensated line output)
* Bi-Amp Crossover: Integrated electronic crossover with dedicated Bi-Amp High Out and Bi-Amp Low Out outputs for multi-amplified setups.
* Footswitch Port: DIN socket for connecting the original remote footswitch (selects Channel A, Channel B, or Automix combination).