Toellner TOE 7621 4-Quadrant Power Supply

3 940.-

Aujourd'hui 11:17

9492, Eschen

Toellner TOE 7621 4-Quadrant Power Supply

Beschreibung:
General
4-quadrant power supplies or 4-quadrant amplifiers are instruments that are capable to provide positive and negative output voltages as well as positive and negative output currents.
Laboratory power supplies are usually only single quadrant power sources. They are only able to deliver power with one single polarity, i.e. these instruments only work in one quadrant of the output voltage/ current diagram. Common amplifiers deliver voltages with both polarities, but are generally unable to absorb power values in a range comparable to that which they are able to deliver. They therefore mainly work as two-quadrant devices.
The TOE 7620 series of 4-quadrant power supplies is able to work as a power sink as well as a power source with equal values of delivered or absorbed power. Thus a TOE 7620 series power supply is bipolar voltage and current source, and a current sink in one instrument and can replace a combination of single components. Frequent problems with the interaction of individual components and unexpected oscillations now belong to the past.
Selectable input voltage range
The input voltage range can be set to a range of ±5 V or ±10 V. Therefore no further external adaptation of the control voltage is necessary.
Variable DC offset
The DC offest voltage at the output can be adjusted to any value within the rated output voltage range. The external control voltage will be amplified and superimposed to the DC offset. This way the ripple voltage in an on-board supply system can easily be simulated.
Adjustable output impedance
The output impedance is adjustable in the range from 0 to 0.5 Urated / Irated.
Short-time load current
All 4-quadrant power supplies of the TOE 7620 series can be equipped with the TOE 7620/103 option to deliver three times the rated current for approx. 3 ms.
Output ON/OFF
A convenient feature is the output switch-off which allows immediate shut down of the output voltage and current when in the Output OFF position. Additionally the output will be isolated!
Special features
320 W source and sink power
Extended power output with parallel units on request
Short-time load current 3 x Irated (option)
Analog control input 0 to 5 V or 0 to 10 V
Slew rate approx. 6 V/s to 25 V/s (depends on model)
Adjustable output impedance
Sensing inputs
Output at front, optional at rear
19 rack mountable, 3 HU
Optimally suitable for electrical noise testing of components against vehicle electrics ripple

Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG

Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)

Plus d'information: www.toellner.de/datenblaetter/TOE 7621_EN_2020.pdf