Teledyne Lecory CA10-Quadpak PRoBus- Current Adapter
2 400.-
23.08.2026
9492, Eschen
Technische Merkmale:
Teledyne Lecory CA10-Quadpak Programmable-PRoBus- Current Adapter
Set of 4 CA10 Programmable Current Sensor to ProBus Adapters for third-party current sensors
Key Features
Provides ability for third party current sensor to operate like a Teledyne LeCroy probe
Programmable EEPROM for saving third party current sensor parameters
Allows for addition of shunt resistor and RLC filter components
ProBus Active interface with automatic scaling in A/div
Easy to use, saves time and possible errors
The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. It allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.
Measurement Flexibility
Examples of devices that can be used with the CA10 include Pearson Current Transformers, Danisense/LEM Current Transducers, PEM-UK Rogowksi Coils, or any conventional turns-ratio current transformers. Once the CA10 is programmed, the third party transducer/transformer will be recognized and operate like a Teledyne LeCroy probe.
Power of Customization
The CA10 provides the ability to easily install physical hardware components such as shunt resistors and bandwidth filter components based on the requirements of the device being used.
The CA10 also has programmable bandwidth limit filters of full BW, 200 MHz, or 20 MHz.
Easy to Use
The programmable interface is intuitive and easy to use. Once the CA10 is configured, it will recognize the third party device with the correct scaling factors on any compatible Teledyne LeCroy oscilloscope or motor drive analyzer. This saves time and possible errors involved in manually entering scaling factors each time the device is connected.
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
Teledyne Lecory CA10-Quadpak Programmable-PRoBus- Current Adapter
Set of 4 CA10 Programmable Current Sensor to ProBus Adapters for third-party current sensors
Key Features
Provides ability for third party current sensor to operate like a Teledyne LeCroy probe
Programmable EEPROM for saving third party current sensor parameters
Allows for addition of shunt resistor and RLC filter components
ProBus Active interface with automatic scaling in A/div
Easy to use, saves time and possible errors
The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. It allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.
Measurement Flexibility
Examples of devices that can be used with the CA10 include Pearson Current Transformers, Danisense/LEM Current Transducers, PEM-UK Rogowksi Coils, or any conventional turns-ratio current transformers. Once the CA10 is programmed, the third party transducer/transformer will be recognized and operate like a Teledyne LeCroy probe.
Power of Customization
The CA10 provides the ability to easily install physical hardware components such as shunt resistors and bandwidth filter components based on the requirements of the device being used.
The CA10 also has programmable bandwidth limit filters of full BW, 200 MHz, or 20 MHz.
Easy to Use
The programmable interface is intuitive and easy to use. Once the CA10 is configured, it will recognize the third party device with the correct scaling factors on any compatible Teledyne LeCroy oscilloscope or motor drive analyzer. This saves time and possible errors involved in manually entering scaling factors each time the device is connected.
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
- Prix CHF
- 2 400.-
- NPA
- 9492
- Envoi disponible
- Oui
- État
- D’occasion
Annonces similaires
Teledyne LeCroy MDA805 Motor Drive Analyzers (Oszilloskop)
18 400.-
Teledyne LeCroy MDA803A Motor Drive Analyzers Oszilloskop
16 700.-
Teledyne LeCroy HVD3106A - High Voltage Differential Probe
2 300.-
Tektronix INC P6021A AC und INC P6022 AC Current Probe
3 840.-
MCTS II Mehrkanal-Stromwandlersystem und 4 Stück LEM IT1000
4 300.-
Labor stabilisiert netzteil einstellbar variable geregelte
125.-
RIGOL RP1100D High Voltage Differential Probe
605.-
Toellner TOE 7621 4-Quadrant Power Supply
3 940.-
Digitales LCR-Messgerät für Tischgeräte 100Hz-100KHz
380.-
PEM Current Waveform Transducer CWTMini 30R Rogowski Probe
650.-
Autool dm303 auto diagnose multimeter auto schaltung tester
220.-
Hantek CC-65/CC-650 AC DC Strom Klemme Meter Wandler
60.-
LeCroy WS3K-MSO Tastkopf
2 400.-
CWT Rogowski Current Probes Typ: CWTMini 60R
650.-
TEKBOX TBLM1 LISN Mate (Set)
960.-
Informations légales
Français
© SMG Swiss Marketplace Group AG 2026.
La duplication et l'appropriation des annonces par des tiers, en particulier des photos et des données personnelles qu'elles contiennent, portent atteinte aux droits associés et sont strictement interdites.