Broughton Audio Fliptop JFET Preamplifier Basspedal
150.-
08.09.2026
3033, Wohlen b. Bern
Broughton Audio Fliptop JFET Preamplifier, Handmade in Canada
Absolut neuwertiges Basspedal für die analoge Emulation eines Ampeg Potraflex B15 Sound.
The Fliptop is a JFET preamplifier that is modeled after the B15 amplifier. The gain staging and EQ sections were carefully designed to give the feel and response of the vintage tube amp, offering a good range of pillowy tone that can be driven to the point of light overdrive if pushed.
In addition to the James stack EQ and gain staging, the Fliptop adds a Master volume control on the output so you can dial in the amount of drive you want while adjusting the volume as needed.
The Cab knob is essentially a wet/dry control, allowing you to apply 0 to 100% of the cab tone to the preamplifier output. Dialing in more of the cab response tightens the low end and cuts the high frequencies for a warm, vintage tone. The frequency response is modelled after the 15" cab.
The pedal requires a 9V DC power supply (not included). The DC supply should be a standard Boss style connector, center negative polarity. The current draw is approximately 12 mA. The power supply may be increased up to 24V DC with the result of more clean headroom and a slight increase in boost.
The Fliptop has a true bypass switch.
Dimensions: 4.77" long x 2.6" wide
Absolut neuwertiges Basspedal für die analoge Emulation eines Ampeg Potraflex B15 Sound.
The Fliptop is a JFET preamplifier that is modeled after the B15 amplifier. The gain staging and EQ sections were carefully designed to give the feel and response of the vintage tube amp, offering a good range of pillowy tone that can be driven to the point of light overdrive if pushed.
In addition to the James stack EQ and gain staging, the Fliptop adds a Master volume control on the output so you can dial in the amount of drive you want while adjusting the volume as needed.
The Cab knob is essentially a wet/dry control, allowing you to apply 0 to 100% of the cab tone to the preamplifier output. Dialing in more of the cab response tightens the low end and cuts the high frequencies for a warm, vintage tone. The frequency response is modelled after the 15" cab.
The pedal requires a 9V DC power supply (not included). The DC supply should be a standard Boss style connector, center negative polarity. The current draw is approximately 12 mA. The power supply may be increased up to 24V DC with the result of more clean headroom and a slight increase in boost.
The Fliptop has a true bypass switch.
Dimensions: 4.77" long x 2.6" wide
- Prix CHF
- 150.-
- NPA
- 3033
- Envoi disponible
- Oui
- État
- Neuf
Annonces similaires
Broughton Audio SV-Pre JFET Preamplifier Basspedal
150.-
Phil Jones Briefcase 160 Watt Bass Combo
600.-
Origin Effects Halcyon Blue Overdrive für Gitarre (fast neu)
140.-
Broughton Omnicomp Compressor für Gitarre oder Bass
200.-
Preamp Pedal Digitale Gitarre Effekte Pedal
85.-
Chase Bliss Audio - Analog EQ/Pre/Filter
400.-
Vintage Overdrive-Effektpedal für E-Gitarren
40.-
Gitarren Pedal Deluxe Multi Spring Reverb (neu)(ink.Versand)
50.-
Tech 21 SansAmp VT Bass DI Bass Preamp/DI
200.-
BOSS BB-1X Bass Driver Premium Effektpedal
120.-
Analoges Chorus-Gitarreneffektpedal mit Frequenzreglern
42.-
2 in 1 Aktive Volume Vintage Wah Gitarre Effekte Pedal
65.-
BB Preamp Original-Version mit Verpackung
120.-
Seltener Johnson Millennium Stereo 250 Head Europe
880.-
ISP theta préamp
100.-
Informations légales
Français
© SMG Swiss Marketplace Group AG 2026.
La duplication et l'appropriation des annonces par des tiers, en particulier des photos et des données personnelles qu'elles contiennent, portent atteinte aux droits associés et sont strictement interdites.