S71 Custom Nitro S Modern/Vintage Hardtail 66 USA

1'590.-

10.05.2026

4133, Pratteln

S71 Custom Made unique « Nitro S Modern/Vintage Hardtail ?66, 3-Tone Sunburst Relic »

Ausgewählter sehr leichter Korpus (3,2 kg/6,6 lbs für die komplette Gitarre), der nach Vintage-Spezifikationen von USACG in Washington, USA, maßgefertigt wurde.
Exakte Nachbildung eines C-Shape Halse von 1959 mit einer Dicke von .790 am 1. Bund / .970 am 12. Bund, ROASTED Quartersawn Maple/AAA Dark Rosewood Griffbrett mit einem Vintage Radius von 7,25", Graviertes Logo, Nitrozellulose Finish, Maßanfertigung von ein Gitarrenbauer in der Region New York, USA.
'Five 9' Handgewickelte Pickup Set von Collins in Dallas Texas, USA.
Verkabelung mit dem berühmten ?7-Sounds?-Mod.
Echtes Gotoh Japan Vintage Tremolo & Kluson typ Mechaniken, Halsplatte mit Seriennummer.
C.O.A enthalten.

Custom made in USA.

NEU, Verkauft mit Zertifikat (C.O.A) und Rechnung.
(Koffer auf Fotos dient nur zur Veranschaulichung)

-------

Babicz Hardtail bridge features:
Double locking system (at the saddle + the side rail)
String through the body
Universal three hole mount-fits Fender VINTAGE and AMERICAN Standard guitars
Patented FCH eCAM technology
High performance all Aluminum design

-------

66?s Neck « Oval C »Luthier custom made in USA, specs:

Roasted AAA Flame Maple shaft
Slab AAA Rosewood fretboard
.840 at 1st fret / .960 at 12th fret
Nut Width 1-5/8"
Compound Radius 9.5-14"
"Cream Clay" Vintage style front and side dots
21 Medium/Jumbo frets from Jescar USA
Heel Vintage Trussrod
Graphtech « Nubone » nut, made in Canada
????

Genuine custom hand wound vintage pickup full specs:

Model T-166 genuine Collins custom hand wound 5/2 Hybrid pickup set with some modern touches
California Glass is a .187 Alnico 5, Alnico 2 hybrid set of single coil pickups with vintage stagger. Magnets oriented S-N-S spec and calibrated for strength
These pickups are overwound 5% at the bridge and 5% underwound at the neck with the middle pickup wound to late ?60?s specs. The underwinding of the neck will give a small mid scooping, while the overwinding at the bridge will provide a mid boost. The Alnico 5 magnets in the 6th, 5th and 4th string positions will keep the bottom end tight and focused while the Alnico 2 magnets in the 3rd, 2nd and 1st string positions will round out the top and coax out the bell tones.
High quality vulcanized fiber flatwork red .062 top with gray .093 bottoms
Though ohms are subject to change in temperature these read around
5.39 K (neck) 2.13 Henries
5.72 K (mid) 2.41 Henries
5.95 K (bridge) 2.55 Henries
measured around 70 degrees

The sandcast alnico 5 and 2 magnets were sealed before winding in my own resin formula to prevent magnet to wire failure
Wound with a beautiful bright red modern poly-nylon AWG42 wire and potted in paraffin/bees wax to silence microphonics.
Vintage black/white cloth wiring about 12" long for the most demanding hookups. Vintage surgical rubber tubing with nickel screws
52mm spacing profile

Note: These Model T-166 scatterwound pickups will hum cancel in the 4th and 2nd positions
They have all the quack and bell tones early single coils are known for
Dripping with tone and ready to rock

They are at home in the California Surf and Sun but are equally home in a Nashville Studio or a Classic Rock venue