Teledyne Lecory CA10-Quadpak PRoBus- Current Adapter
2'400.-
Heute 09:27
9492, Eschen
Technische Merkmale:
Teledyne Lecory CA10-Quadpak Programmable-PRoBus- Current Adapter
Set of 4 CA10 Programmable Current Sensor to ProBus Adapters for third-party current sensors
Key Features
Provides ability for third party current sensor to operate like a Teledyne LeCroy probe
Programmable EEPROM for saving third party current sensor parameters
Allows for addition of shunt resistor and RLC filter components
ProBus Active interface with automatic scaling in A/div
Easy to use, saves time and possible errors
The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. It allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.
Measurement Flexibility
Examples of devices that can be used with the CA10 include Pearson Current Transformers, Danisense/LEM Current Transducers, PEM-UK Rogowksi Coils, or any conventional turns-ratio current transformers. Once the CA10 is programmed, the third party transducer/transformer will be recognized and operate like a Teledyne LeCroy probe.
Power of Customization
The CA10 provides the ability to easily install physical hardware components such as shunt resistors and bandwidth filter components based on the requirements of the device being used.
The CA10 also has programmable bandwidth limit filters of full BW, 200 MHz, or 20 MHz.
Easy to Use
The programmable interface is intuitive and easy to use. Once the CA10 is configured, it will recognize the third party device with the correct scaling factors on any compatible Teledyne LeCroy oscilloscope or motor drive analyzer. This saves time and possible errors involved in manually entering scaling factors each time the device is connected.
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
Teledyne Lecory CA10-Quadpak Programmable-PRoBus- Current Adapter
Set of 4 CA10 Programmable Current Sensor to ProBus Adapters for third-party current sensors
Key Features
Provides ability for third party current sensor to operate like a Teledyne LeCroy probe
Programmable EEPROM for saving third party current sensor parameters
Allows for addition of shunt resistor and RLC filter components
ProBus Active interface with automatic scaling in A/div
Easy to use, saves time and possible errors
The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. It allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.
Measurement Flexibility
Examples of devices that can be used with the CA10 include Pearson Current Transformers, Danisense/LEM Current Transducers, PEM-UK Rogowksi Coils, or any conventional turns-ratio current transformers. Once the CA10 is programmed, the third party transducer/transformer will be recognized and operate like a Teledyne LeCroy probe.
Power of Customization
The CA10 provides the ability to easily install physical hardware components such as shunt resistors and bandwidth filter components based on the requirements of the device being used.
The CA10 also has programmable bandwidth limit filters of full BW, 200 MHz, or 20 MHz.
Easy to Use
The programmable interface is intuitive and easy to use. Once the CA10 is configured, it will recognize the third party device with the correct scaling factors on any compatible Teledyne LeCroy oscilloscope or motor drive analyzer. This saves time and possible errors involved in manually entering scaling factors each time the device is connected.
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
- Preis CHF
- 2'400.-
- PLZ
- 9492
- Versand verfügbar
- Ja
- Zustand
- Gebraucht
Ähnliche Inserate
Teledyne LeCroy MDA805 Motor Drive Analyzers (Oszilloskop)
18'400.-
Teledyne LeCroy MDA803A Motor Drive Analyzers Oszilloskop
16'700.-
Teledyne LeCroy HVD3106A - High Voltage Differential Probe
2'300.-
Labor stabilisiert netzteil einstellbar variable geregelte
125.-
Toellner TOE 7621 4-Quadrant Power Supply
3'940.-
Fluke 233 Multimeter mit abnehmbarem Anzeigemodul
240.-
Amprobe AM-100 & Amprobe ACD-10 pro Set
92.-
Digitales LCR-Messgerät für Tischgeräte 100Hz-100KHz
380.-
Autool dm303 auto diagnose multimeter auto schaltung tester
220.-
Hantek CC-65/CC-650 AC DC Strom Klemme Meter Wandler
60.-
LeCroy WS3K-MSO Tastkopf
2'400.-
Common-Rail-Druck prüfer Simulator für das Diagnose werkzeug
90.-
CWT Rogowski Current Probes Typ: CWTMini 60R
650.-
Stromwandler Micsig Current Probe
200.-
TEKBOX TBLM1 LISN Mate (Set)
960.-
Rechtliche Hinweise
Deutsch
© SMG Swiss Marketplace Group AG 2026.
Die Vervielfältigung und Übernahme von Inseraten durch Dritte, insbesondere von Fotos und persönlichen Daten in diesen Inseraten, verletzt die damit verbundenen Rechte und ist ausdrücklich verboten.