NK51S 1080p HDMI to HDMI Digital Multi-channel Audio Decoder

40.-

08.10.2018
Audio e Hi-Fi
Grigioni, 7013
Preis: CHF 40.00 inkl POST Lieferkosten!
Garantie: Nach Erhalt des Produktes betr?gt die Garantielaufzeit zwei Jahre!


Zahlungskonditionen:
1. Barzahlung bei Abholung
2. UBS Paymit Bezahlung (Unsere UBS Paymit Handy Nummer: 0796898878) oder per TWINT
3.überweisung Bank / Post
4. Oder Per PayPal, dann kommen aber noch 3% des Gesamtpreises dazu (Paypalgebühren)
5. POST Nachnahme (Zusaetzliche CHF 15.00 mehr als POST gebühren)

The products are designed to make your A/V device use more convenient, comfortable, productive and cost-efficient.
The HDMI Digital Audio Decoder allows you to extract audio signals from your HDMI source. You can take your original HDMI audio signal and convert it to digital optical or analog 5.1 sound track output.
This product supports Dolby digital AC-3, DTS, LPCM and other digital audio format decoding. It is one perfect audio decoder for your DVD, Blue-Ray DVD, PS3, X360BOX, HD Player, PC etc.
Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

[FEATURES]
1.1X HDMI input and 1X HDMI output
2. 1X VGA analog video sync output, 1X SPDIF optical digital audio and 6 channel RCA analog audio output that can connect with the amplifier or the TV directly.
3.MHL/HDMI working in dual mode, support audio and video input in MHL mode, and can charge for MHL equipment
4. Support HDMI input up to 1080P/60Hz, supports 3D (24/30fs)
5. Support CEC and HDCP
6.Supports 3 modes of EDID management for audio formats, can switch among built-in EDID (2CH/5.1CH) and external EDID (TV).
7. Uses 24 bit/96KHz audio DSP and 24bit /192KHz DAC
8. Support digital audio formats:Dolby digital (AC3), DTS, LPCM, automatic identification signal format
9. VGA output resolution format with the input format automatically changes
10. Headphone amplifier output, can drive the general 3.5mm earphone
11. High tone quality, low noise
12. DC5V/1A power adapter

SWITCH:Audio EDID mode switch. This switch allows users to select the source's audio EDID.
PASS:HDMI pass mode. Switch to PASS mode for the HDMI source to output audio per the
EDID of connected TV or AV receiver, supports up to LPCM 7.1 channels.
2CH:2CH LPCM mode. Switch to 2CH mode for the HDMI source to output LPCM 2 channels
audio per the built-in EDID. Then HDMI, SPDIF, RCA and headphones output stereo
audio.
5.1CH:5.1CH bitstream Mode. Switch to B5.1CH mode for the HDMI source to output
bitstream audio per the built-in EDID. Then HDMI, SPDIF and RCA output 5.1CH audio,
headphone output from FL and FR channel.
O/I:Power on/standby
PWR LED:POWER ON/OFF indicator
DC5V:5V DC in jack
SL/SR:Surround L/R analog output
SW:Sub woof analog output
VGA OUT:VGA analog video output
HDMI/MHL IN:HDMI/MHL dual mode input
FL/FR:Front L/R analog output
CEN:Center analog output
SPDIF OUT:Optical/Toslink output
HDMI OUT:HDMI output

[OPERATIONG AND CONNECTION]
Connect one HDMI cable from a DVD/Blu-ray player into input port of decoder.
Connect one HDMI/VGA cable from TV/Monitor into output port of decoder.
If you need a digital audio, connect one optical fiber from digital power amplifier into the SPDIF output port of decoder.
If you need an analog audio, Connect six AV cables from analog power amplifier into the analog audio output ports of decoder, the channel must correspond. If the connected TV or stereo power amplifier, connect the FL/FR two channel only, and switch EDID mode in 2CH.
If you need to use the headphone output, pls switch EDID mode in 2CH.
Connect 5V power supply to the decoder and inserted into the power socket.
VGA output resolution format with the input format automatically changes.
Tipo
Offerte
Prezzo CHF
40.-
CAP
7013
Link sponsorizzati
Annotare