Tutti gli annunci di Francisco
Attivo dal 23.09.2017
34 annunci
Ordina per
Dal più nuovo
Zurigo 55, 8055, 16.09.2026
BMW R 1300 GS 23'-25' Lambda-Sonden-Schutz (NDURO.CH)
BMW R 1300 GS 23'-25' (NDURO.CH) Lambda-Sonden-Schutz (Links & Rechts)
135.-
Zurigo 55, 8055, 16.09.2026
Ritchey Stem / Vorbau 120mm +/-6° 26.0mm
Ritchey Stem / Vorbau 120mm +/-6° 26.0mm
15.-
Zurigo 55, 8055, 16.09.2026
Seat Concepts Cover KTM SX/EXC 2017-2018 (NDURO.CH)
Seat Concepts Cover KTM SX EXC 2017-2018 (NDURO.CH)
Tall Comfort model.
New and never installed.
75.-
Zurigo 55, 8055, 16.09.2026
KTM 950 / 990 Regulator/Rectifier Relocation Kit (NDURO.CH)
KTM 950 / 990 Regulator/Rectifier Relocation Kit (NDURO.CH)
75.-
Zurigo 55, 8055, 16.09.2026
Lambda / O2 (Oxygen) Sensor Eliminator (NDURO.CH)
The (NDURO.CH) O2 Sensor Eliminator Kit replaces the factory oxygen (lambda) sensor in your motorcycle?s exhaust system. It allows the ECU to bypass the restrictive feedback loop of the stock O2 sensor and operate using the installed air?fuel map.
The result is improved throttle response, smoother power delivery, and increased torque across the low and mid-RPM range.
This kit is designed for motorcycles that comply with Euro 2, Euro 3, and, in some cases, Euro 4 emissions standards.
Motorcycle manufacturers install oxygen sensors to maintain a stoichiometric air/fuel ratio - ideal for emissions compliance, but not for maximum performance.
When converting a bike for trackdays or off-road use, achieving optimal fueling is essential.
However, simply removing the O2 sensor will trigger an FI (Fuel Injection) error.
Our version of the O2 Sensor Eliminator combines the electronic eliminators and the exhaust port plugs in a single, convenient plug-and-play package.
This allows for the complete removal of the O2 sensor system without any FI errors or side effects.
Key Features:
Improves throttle response and smooths power delivery, with more torque in the low and mid-RPM range.
Fully supports fuel tuning modifications such as Power Commander or ECU remapping, where O2 sensor removal is required.
Ideal for aftermarket exhaust systems that do not include an oxygen sensor port.
Can be used to replace a faulty O2 sensor to restore proper ECU operation.
Plug-and-play installation - no cutting, splicing, or wiring modifications needed.
Includes the correct number of eliminators and exhaust plugs to bypass the O2 system.
Legal Notice!
This product is intended for closed-circuit or off-road competition use only.
The purchaser acknowledges that this performance component is not approved for street use in regions subject to emissions regulations.
Compatible models:
Ducati Monster 1200: 2014-2021
Ducati Monster 821: 2014-2021
Ducati Scrambler 1100: 2018-2020
Ducati SuperSport 939:> 2017-2020
KTM 1050 Adventure: 2015-2017
KTM 1090 Adventure: 2017-2019
KTM 1190 Adventure: 2013-2016
KTM 1290 Super Adventure: 2015-2020
KTM 1290 Super Duke GT: 2016-2020
KTM 1290 Super Duke R: 2014-2020
Triumph Bonneville 1200 T120: 2016-2020
Triumph Bonneville 865: 2008-2015
Triumph Bonneville 900 T100: 2016-2020
Triumph Bonneville America 865: 2008-2015
Triumph Bonneville Bobber: 2017-2020
Triumph Scrambler 1200: 2019-2020
Triumph Scrambler 865: 2008-2015
Triumph Speed Twin 1200: 2019-2020
Triumph Speed Twin 900: 2019-2020
Triumph Speedmaster 1200: 2018-2020
Triumph Speedmaster 865: 2007-2015
Triumph Street Cup: 2017-2019
Triumph Street Scrambler 900: 2016-2020
Triumph Street Twin 900: 2016-2018
Triumph Thruxton 1200: 2016-2020
Triumph Thruxton 900: 2008-2015
Triumph Thunderbird 1600: 2009-2017
Triumph Thunderbird 1700: 2011-2017
55.-
Zurigo 55, 8055, 16.09.2026
ZETA BarEnd Plugs (Yamaha / Husqvarna)
ZETA BarEnd Plugs (Yamaha / Husqvarna)
WR / YZ
TE / TC
Tenere 700
T7
10.-
Zurigo 55, 8055, 16.09.2026
KTM 950 / 990 Radsatz 17"
KTM 950 / 990 Radsatz 17"
Supermoto wheelset for KTM 950 Super Enduro (SE)
Can be used on other 950/990 models, but front wheel is only for 1 brake disc.
Front Tire:
- Metzeler Sportec M5 Interact 120/70 ZR17 (Used)
Rear Tire:
- Metzeler Sportec M5 Interact 180/55 ZR17 (New)
600.-
Zurigo 55, 8055, 16.09.2026
BMW R 1250 GS Set 11-teilig Rahmenstopfen (NDURO.CH)
(NDURO.CH) BMW R 1250 GS Set Rahmenstopfen (11-teilig)
55.-
Zurigo 55, 8055, 16.09.2026
Roko Quick Strap for Enduro & Motocross Goggles
Roko Quick Strap for Enduro & Motocross Goggles
Universal (check compatibility online)
100%
Oakley
Scott
Smith
Ethen
?
20.-
Zurigo 55, 8055, 16.09.2026
2x Motorrad Mini LED Blinker (NDURO.CH)
The simplest and cleanest way to install LED indicators on your bike.
These (NDURO.CH) indicators come pre-wired with universal bullet style plug, with adapters also available through our shop.
If you plan to replace both front and rear indicators, please order two pairs.
Note: On some models, you may require a different LED blinker relay to maintain the correct flash rate when switching to LED indicators.
Features:
E-marked for road use
Direct-fit KTM / Husqvarna connector as optional
Slim, modern, and low-profile design
Bright LED signal output for improved visibility
Specifications:
Mounting Bolt: M8 (ALSO AVAILABLE IN M10!)
Stalk Length: TBC
Light Section Length: TBC
Total length (visible): TBC
30.-
Zurigo 55, 8055, 16.09.2026
Yamaha Tenere 700 T7 Rally: ABS Disconnect Switch (NDURO.CH)
Yamaha Tenere 700 T7 Rally: (NDURO.CH) ABS Disconnect Switch
50.-
Zurigo 55, 8055, 16.09.2026
Santa Cruz Jackal BMX 2 24" (1997)
Santa Cruz Jackal BMX 2 24" (1997)
1 000.-
Zurigo 55, 8055, 16.09.2026
Motion Pro Fork Bleeder Set (Gabelentlüftungsset) NDURO.CH
Motion Pro KTM Fork Bleeder Set (Gabelentlüftungsset) (NDURO.CH)
For KTM, Husqvarna, GasGas
20.-
Zurigo 55, 8055, 16.09.2026
Stuckmate KTM (NDURO.CH)
Stuckmate (NDURO.CH)
KTM 125 250 350 450 500
Husqvarna
Honda
Kawasaki
GasGas
Beta
Suzuki
20.-
Zurigo 55, 8055, 16.09.2026
absoluteBLACK Top Cap (Absolute Black)
absoluteBLACK Top Cap (Absolute Black)
15.-
Zurigo 55, 8055, 16.09.2026
Stuckmate Kawasaki (NDURO.CH)
Stuckmate (NDURO.CH)
KTM 125 250 350 450 500
Husqvarna
Honda
Kawasaki
GasGas
Beta
Suzuki
20.-
Zurigo 55, 8055, 16.09.2026
Kardan-Schleifschutz BMW R 1300 GS/ GSA (NDURO.CH)
NDURO Kardan-Schleifschutz für BMW R 1300 GS/ GSA/ RT/ RS/ R
100.-
Zurigo 55, 8055, 16.09.2026
Waeco PerfectPower PP2002 Inverter
Waeco PerfectPower PP2002
12V DC >> 230V AC
2000W continuous (4000W peak)
350.-
Zurigo 55, 8055, 16.09.2026
Litespeed Ghisallo 5,5Kg
Litespeed Ghisallo 5,5Kg
Sram Red
Ax Lightness Brakes
Ax Lightness Seatpost + Saddle
Schmolke Handlebar
Tune Stem
Lightweight Wheelset
Speedplay Pedals (Ti Axle)
4 500.-
Zurigo 55, 8055, 16.09.2026
KTM SAS Valve Removal Kit with Block Off Plates (NDURO.CH)
The (NDURO.ch) SAS Valve Removal Kit with Block-Off Plates is designed to fully remove the Secondary Air System (SAS) from your motorcycle. The SAS system channels fresh air from the airbox into the exhaust to assist in burning uncombusted fuel, which helps reduce emissions on stock exhaust configurations. However, when aftermarket exhausts are installed, this system commonly causes exhaust popping and backfiring on deceleration.
This kit provides all components required to eliminate the SAS system in one complete package. The CNC-cut block-off plates offer a precise fit and a clean, high-quality finish, allowing for a professional-level installation.
Key Features:
Reduces or eliminates exhaust popping and backfiring associated with aftermarket exhaust systems
Provides accurate and stable air-fuel ratio readings, enabling precise fuel tuning
Frees up engine space by removing unnecessary components
Allows complete removal of the SAS valve, covers, and associated hoses and fittings
Kit Includes:
CNC-machined block-off plates
All required fittings, hardware, and installation components
Legal Notice: This product is intended for off-road and closed-course competition use only. In some countries/regions, removing emissions equipment may be illegal for street use. The purchaser acknowledges responsibility for compliance with local laws and regulations.
Fits:
KTM 1050 Adventure: 2015-2017
KTM 1090 Adventure: 2017-2019
KTM 1190 Adventure: 2013-2016
KTM 1190 RC8: 2007-2016
KTM 1290 Super Adventure: 2015-2024
KTM 1290 Super Duke GT: 2016-2024
KTM 1290 Super Duke R: 2014-2023
KTM 1390 Super Duke R / EVO: 2024-2024
KTM 990 Adventure: 2006-2013
KTM 990 SM / SMR / SMT: 2008-2014
KTM 990 Superduke: 2005-2013
KTM BRABUS 1300: 2022-2023
45.-
Zurigo 55, 8055, 16.09.2026
KTM Side Stand/Seitenstander Switch Dongle (NDURO.CH)
The (NDURO.CH) Sidestand Switch Eliminator allows you to remove or relocate the side stand switch, and helps prevent unexpected engine shutdown caused by switch failure. The original side stand switch is positioned in a vulnerable location where it can be damaged by trail obstacles, road debris, or simply fail over time. When this occurs, the ECU assumes the side stand is down and will prevent the motorcycle from moving by switching off the engine as soon as a gear is engaged. This Switch Eliminator kit eliminates that risk, providing a reliable solution that ensures the engine remains operational even if the side stand switch is removed, relocated, or damaged.
Features:
Prevents engine switch off caused by faulty or damaged side stand switches
Ideal for both off-road, adventure or track riding
Quick and straightforward installation
Fits:
Ducati Panigale 1199: 2012-2014
Ducati Panigale 1299: 2015-2018
Ducati Panigale 899: 2013-2015
Ducati Panigale 959: 2016-2019
Ducati Panigale V2 / S: 2020-2024
Ducati Panigale V4 > 2018-2024
Ducati Panigale V4 S: 2018-2025
Ducati Streetfighter V2: 2022-2024
Ducati Streetfighter V4: 2020-2025
Ducati Superleggera V4: 2020-2021
Gas Gas ES 700 (EU): 2022-2024
Gas Gas SM 700 (EU): 2022-2024
Husqvarna 701 Enduro (EU): 2015-2016
Husqvarna 701 Enduro (EU): 2021-2024
Husqvarna 701 Supermoto (EU): 2015-2016
Husqvarna 701 Supermoto (EU): 2021-2024
KTM 1190 Adventure: 2013-2016
KTM 1190 RC8: 2007-2016
KTM 1290 Super Adventure: 2023-2024
KTM 1290 Super Duke GT: 2022-2024
KTM 1290 Super Duke R: 2014-2016
KTM 1290 Super Duke R: 2020-2023
KTM 690 Duke: 2008-2016
KTM 690 Enduro: 2008-2018
KTM 690 Enduro: 2021-2024
KTM 690 SM / SMR / SMC: 2007-2018
KTM 690 SM / SMR / SMC: 2021-2024
KTM 950 Super Enduro R: 2006-2010
KTM 950 Super Moto: 2005-2008
KTM 990 Adventure: 2006-2013
KTM 990 SM / SMR / SMT: 2008-2014
KTM 990 Superduke: 2005-2013
KTM BRABUS 1300: 2022-2023
25.-
Zurigo 55, 8055, 16.09.2026
Yamaha Tenere 700 Sidestand Switch Eliminator (NDURO.CH)
Your Tenere 700 (NDURO.CH) Sidestand Safety Switch prevents you from riding with the side stand down ? a useful feature until it gets damaged during off-road riding. When that happens, the bike won?t run in gear, potentially leaving you stranded on the trail.
Fortunately, our bypass plug is an inexpensive, quick, and easy fix.
Also applicable on several other Yamaha models, including track racing usage, allowing complete Sidestand removal.
Fits:
Yamaha FZ-10: 2017+
Yamaha MT-03: 2016+
Yamaha MT-10/SP: 2017+
Yamaha R1/M/S: 2008+
Yamaha R25: 2014+
Yamaha R3: 2015+
Yamaha R6: 2008+
Yamaha Tenere 700: 2019+
Yamaha WR250F: 2008+
Yamaha XT1200Z/ZE: 2010+
9.-
Zurigo 55, 8055, 16.09.2026
2x Sun Ringle Double Wide Rims 24" 32h (NOS)
Sun Ringle Double Wide Rims 24 32h (NOS)
200.-
Zurigo 55, 8055, 16.09.2026
3x Sun Ringle Double Track 24" 32h (NOS)
3x Sun Ringle Double Track 24" 32h (NOS)
200.-