RIGOL NFP-3 Near Field Probe Set, 30MHz to 3 GHz
360.-
Aujourd'hui 11:04
9492, Eschen
Technische Merkmale:
RIGOL NFP-3 Near Field Probe Set, 30MHz to 3 GHz
NFP-3 Set includes four models (NFP-3-P1, NFP-3-P2, NFP-3-P3 and NFP-3-P4)
NFP-3 is used with RIGOL RSA/DSA series spectrum analyzer for the EMI tests of electronic products. It can be used to test the magnetic field strength and magnetic field coupling channels on the surface of the electronic components as well as the magnetic field environment near the electronic module so as to quickly locate the interference source.
Connect the spectrum analyzer Connect the SMB (M) terminal of NFP-3 and the BNC (F) terminal of the N-BNC adaptor respectively via the BNC-SMB RF cable; connect the N (M) terminal of the N-BNC adaptor to the RF input terminal of the spectrum analyzer. Connect the device under test NFP-3 is used to perform short-distance noncontact measurement on the device under test. Pay attention to the direction of the probe during measuring.
Frequency Frequency Range 30 MHz to 3 GHz
Terminal Type SMB (M)
Adaptor N (M)-BNC (F)
RF Cable BNC (M)-SMB (F), 1000 mm
Terminal and Adaptor Impedance 50
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
RIGOL NFP-3 Near Field Probe Set, 30MHz to 3 GHz
NFP-3 Set includes four models (NFP-3-P1, NFP-3-P2, NFP-3-P3 and NFP-3-P4)
NFP-3 is used with RIGOL RSA/DSA series spectrum analyzer for the EMI tests of electronic products. It can be used to test the magnetic field strength and magnetic field coupling channels on the surface of the electronic components as well as the magnetic field environment near the electronic module so as to quickly locate the interference source.
Connect the spectrum analyzer Connect the SMB (M) terminal of NFP-3 and the BNC (F) terminal of the N-BNC adaptor respectively via the BNC-SMB RF cable; connect the N (M) terminal of the N-BNC adaptor to the RF input terminal of the spectrum analyzer. Connect the device under test NFP-3 is used to perform short-distance noncontact measurement on the device under test. Pay attention to the direction of the probe during measuring.
Frequency Frequency Range 30 MHz to 3 GHz
Terminal Type SMB (M)
Adaptor N (M)-BNC (F)
RF Cable BNC (M)-SMB (F), 1000 mm
Terminal and Adaptor Impedance 50
Allgemeines:
# Abholung möglich.
# Verkauf wegen Auflösung eines Entwicklungsstandortes der RHIVA AG.
# Direktverkauf, ohne Zwischenhandel durch RHIVA AG
Zustand:
# Neuwertig, voll funktionsfähig
# Einsatz in Forschungs- und Entwicklungslabor (ESD-Raum)
- Prix CHF
- 360.-
- NPA
- 9492
- Envoi disponible
- Oui
- État
- Neuf
Annonces similaires
RIGOL RP1100D High Voltage Differential Probe
605.-
EFM Tester Elektrosmog PCE EMF 30
45.-
Narda PMM EMI Receiver 9010F
12 690.-
Spektrum Analyser Rigol DSA815
700.-
RIGOL DSA815 Spectrum Analyzer
650.-
Rigol dp2031 3 kanal programmier bare Gleichstrom versorgung
1 500.-
EMF Tester zur Messung der elektromagnetischer Strahlung
189.-
NOYAFA Multifunktionale RJ45 CAT6 Netzwerk Kabel Tester
150.-
Scharzbeck NNHV 8123-200 (2fach) in Gehäuse HVSE8600
4 750.-
Keysight Current Probe 1147B - 50 MHz/15A AC/DC
2 260.-
TEKBOX TBLM1 LISN Mate (Set)
960.-
Fluke 3000 FC True RMS Multimeter
225.-
Fluke 233 Multimeter mit abnehmbarem Anzeigemodul
240.-
Schwarzbeck NNHV 8123-400 (2fach) in Gehäuse HVSE8600
8 140.-
RIGOL USB-GPIB Modul
100.-
Informations légales
Français
© SMG Swiss Marketplace Group AG 2026.
La duplication et l'appropriation des annonces par des tiers, en particulier des photos et des données personnelles qu'elles contiennent, portent atteinte aux droits associés et sont strictement interdites.