NK-C6 Digital to Analog Audio HiFi Headphone Amplifier


Audio & Hi-Fi
Graubünden, 7013
Preis: CHF37 .00 inkl POST Lieferkosten!
Garantie: Nach Erhalt des Produktes betr?gt die Garantielaufzeit zwei Jahre!

1. Barzahlung bei Abholung
2. UBS Paymit Bezahlung (Unsere UBS Paymit Handy Nummer: 0796898878) oder per TWINT
3.überweisung Bank / Post
4. Oder Per PayPal, dann kommen aber noch 3% des Gesamtpreises dazu (Paypalgebühren)
5. POST Nachnahme (Zusaetzliche CHF 15.00 mehr als POST gebühren)

This Digital to Analog Audio converter is designed for home or professional audio switching,It converts coaxial or Toslink digital audio signals to analog L/R audio and can be connected to external devices such as amplifiers via a standard RCA-type jack,You can also 3.5mm headphone jack output,connect high-fidelity headphones,The converter is small and easy to install,Built-in high-fidelity amplifier chips,headp-hones and RCA output port can easily push 16-300 ohm high-fidelity headphones,Product support power off,the volume size adjustment,more easily adapt to different sources,different environments,The product also supports Toslink input to Toslink,coaxial output,coaxial input to Toslink,coaxial output,can adapt to more digital audio amplifier interface.

This converter has many features that enable it to perform is a superior manner.
Among those features you will find:
?Converts Coaxial or Tosink digital audio signals to analog L/R audio
?Supports sampling rate at 32kHZ,44.1kHZ,48kHZ,96kHZ and 192kHZ,up to 24-bit resolution
?24-bit S/PDIF incoming bit stream on left and right channels
?Supports 16-300 ohm high-fidelity headphones
?Support power off
?Support the sound size to adjust at will
?Supports Toslink input to coaxial output
?Supports coaxial input to Toslink output
?Provides electrcomagnetic-noise-free transmission
?Easy to install and simple to operate

Before attempting to use this unit,please check the packing and make sure the following items are contained in the shipping carton
1)Main unit(Digital to Analog Audio HiFi Headphone Amplifier)--------1pcs
2)5V DC Power Supply-------1pcs
3)User's Manual-------1pcs

Before installation,please make sure all decices you wish to connect have been turned off,
1) Connect the audio source device to the Converter using appropriate Toslink or Coaxial cables,
2) Connect the A/V Receivers or Amplifiers to the Converter using appropriate R/L cable.
3) Insert the DC side of 5V power supply into the converter and then connect the AC side of the power supply into the wall outlet,Turn the power switch to adjust the volume.
Attention:Insert/Extract cable gently.
Preis CHF
Gesponserte Links


7013, Graubünden