Spielt auf dem Level meiner McIntosh C11/C22 und der Marantz 7. Eben kein "Vintage - Sound", sondern erstklassige Röhrentechnologie, wo bei den TOTL-Geräten noch kein Rotstift angesetzt wurde. Heathkit führt ein Underdog - Dasein, obwohl es z.B. auch die Altec VOTT A7 / Altec 19 als getarntes Derivat von Heathkit gab, logisch mit den originalen Teilen von Altec. Die AA-11 ist eine absolute Rarität und ein bezahlbarer Geheimtip, da diese offiziell nie nach Europa exportiert wurde.
Zustand: Wie ersichtlich, ein komplettes Chassis ohne Röhren. Wurde von einigen Wochen mit meinen "Teströhren" täglich gebraucht, alles scheint passabel zu funktionieren. Für mein Dafürhalten ist eine komplette Revision jedoch ZWINGEND notwendig, somit erfolgt der Verkauf als zu 100% DEFEKT.
Sonstiges: A Masterpiece in design and performance! ... This New Deluxe STEREO PREAMPLIFIER. Beautifully designed to match the acclaimed styling concept of the top of the Heathkit high-fidelity line, the new AA-11 Deluxe Stereo Preamplifier brings you every feature you've ever wanted in a "master-control" center. Both non-technical music lover and technically-inclined audio-phile alike will applaud its many refined features, professional quality performance and exceptional simplicity of operation. A real beauty designed for installation in the most elaborate of stereophonic systems.The primary switches allow fast, easy selection of (1) stereo phonograph (magnetic or ceramic); (2) stereo tape head; (3) stereo microphone; (4) stereo FM; (5) stereo auxiliary input; (6) monophonic AM tuner; (7) monophonic FM tuner; (8) monophonic auxiliary; and (9) OFF/ON switch. All equalization circuits are switched simultaneously by the program source selector buttons. SPECIFICATIONSChannels: Two. Inputs: 5 stereo each channel and 2 monophonic. Input Impedance: Tape head, 220 k ohms; Phono, 47 k ohms for magnetic, 75 k ohms when used with ceramic; Microphone, 500 k ohms; Multiplex 600 k ohms and Aux, 600 k ohms. All monophonic inputs 600 k ohms input impedance. Outputs: One low impedance to power amplifier and one low impedance to tape recorder in each channel plus a "derived center channel" monophonic output at 10 k ohms impedance. Frequency response: ± 1 db from 15-30000 cps. Harmonic distortion: Max. .15% @ 2.5 volts output. Intermodulation distortion: Max. .3% @ 2.5 volts output. Hum & noise All values relative to 2.5 V rms output; 2.5 mv input at Tape Head input, 50 db or better; 6 mv input at Mag. phono input, 60 db or better; 2.5 mv input at Microphone input, 60 db or better; .1 volt input at Aux. 75 db or better. Channel separation: 1 kc, 40 db or better. Rumble filter: 3 db down at 42 cycles. 12 db attenuation per octave. Scratch filter: 3 db down at 6 kc. 20 db attenuation per octave. Baxandall tone controls: 12 db boost, 16 db cut at 20 cps; 12 db boost, 20 db cut at 20,000 cps. Controls: Separate Bass & Treble, each channel; Volume-Loudness, Blend, Balance, Rumble Filter, Scratch Filter, Volume-Loudness switch, Stereo-Mono switch, 9 push button Source Selector switch, Phase Reversal switch, and Channel Reversal switch. Tube complement: (8) 12AX7, (2) 12AT7. Power requirements: 117 V AC 50-60 cycles. Dimensions: 5½" H x 11½" D x 15 5/8" W. Shipping Weight: 19 lbs.